|
|
|
|
|
| |
High voltage.
"LIXING" lithium battery voltage is 3V, almost
double that of conventional dry battery. The discharge
voltage is stable and reliable.
Excellent leakage resistance.
The battery construction ensure maximum leakage resistance
rate at room temperature is approximately 2 percent of the
nominal capacity. The shelf time of lithium battery is 5
times that of conventional dry battery.
Excellent quick pulse discharge characteristics.
Outstanding temperature characteristics.
The battery has a wide temperature range of -20 to +60 degree
C. |
|
 |
|
|
|
|
Watches ,Calculators ,Portable Computer
,Electronic key,
Card-type, radios ,IC card ,Memory card ,Electronic healthy care devices
and
CMOS memory backup power source. |
|
|
|
|
|
 |
 |
| |
- DO NOT recharge, short-circuit, disassemble, deform,
heat or place the battery near a direct flame. This
battery contains flammable materials such as lithium and
organic solvent and performing any of the above actions
could cause it to ignite, explode or become damaged.
- Keep this battery out of the reach of children. If
it is swallowed, contact a physician immediately.
- When storing the battery or throwing it away, be sure to
cover it with tape. If the
battery comes into contact
with other metal objects, it could ignite or become
damaged.
|
|
| |
|
|
 |
 |
| |
Closely observe the following
precautions. If the battery is used incorrectly, it
could leak or become damage, causing device trouble or injury.
- Insert the battery with the "+" and
"-" ends correctly oriented.
- If the battery is used together with new batteries, do
not use it with a different type of battery.
- Do not apply solder directly to the battery.
- Avoid storing the battery in direct sunlight, or in
excessively hot and humid locations.
|
|
|
|
|
Model
Number |
Nominal
voltage
(V) |
Nominal
Capacity
(mAh) *1 |
Standard
Discharge
Current(mA) |
Max Discharge Current (mA) |
Max Dimension (mm) |
Weight
(g) |
|
Continuous *2 |
Pluse *3 |
Diameter (D) |
Height (H) |
|
CR1216 |
3 |
28 |
0.05 |
2 |
5 |
12.5 |
1.6 |
0.7 |
|
CR1220 |
3 |
35 |
0.05 |
2 |
5 |
12.5 |
2.0 |
0.8 |
|
CR1225 |
3 |
50 |
0.05 |
2 |
5 |
12.5 |
2.5 |
1.0 |
|
CR1616 |
3 |
55 |
0.1 |
3 |
8 |
16.0 |
1.6 |
1.2 |
|
CR1620 |
3 |
70 |
0.1 |
3 |
8 |
16.0 |
2.0 |
1.3 |
|
CR2016 |
3 |
75 |
0.1 |
5 |
17 |
20.0 |
1.6 |
1.7 |
|
CR2025 |
3 |
150 |
0.2 |
5 |
14 |
20.0 |
2.5 |
2.7 |
|
CR2032 |
3 |
210 |
0.2 |
4 |
12 |
20.0 |
3.2 |
3.2 |
|
CR2032S*4 |
3 |
170 |
1.8 |
|
|
20.0 |
3.2 |
3.2 |
|
CR2430 |
3 |
270 |
0.4 |
6 |
21 |
24.5 |
3.0 |
4.0 |
|
CR2450 |
3 |
500 |
0.2 |
3 |
15 |
24.5 |
5.0 |
6.2 |
|
|
Note:
- Nominal capacity is measured by
discharging the battery in standard discharge current to cutting off
voltage 2.0V at 23˚C.
- The max continuous
discharge current means that when the battery is discharged in this current
to 2.0V at 23˚C, 50% of nominal capacity could be obtained.
- Max pulse current means that
when a 40% discharge battery is added to this load 15 seconds, the loaded
voltage should be higher than 2.0V at 23˚.
- "S" indicates high temperature
battery, whose normal capacity is measured by discharging the battery in
standard discharge current to 2.0V at 95˚C.
|
|
|
|
|
